ISL8502AEVAL1Z開發(fā)板套件編程器的評估板-DC/DC與AC/DC（離線）SMPS規(guī)格書PDF中文資料

2A Synchronous Buck Regulator with Integrated MOSFETs

The ISL8502A is a synchronous buck controller with internal MOSFETs packaged in a small 4mmx4mm QFN package. The ISL8502A can support a continuous load of 2A and has a very wide input voltage range. With the switching MOSFETs integrated into the IC, the complete regulator footprint can be very small and provide a much more efficient solution than a linear regulator.

The ISL8502A is capable of stand-alone operation or it can be used in a master slave combination for multiple outputs that are derived from the same input rail. Multiple slave channels (up to six) can be synchronized. This method minimizes the EMI and beat frequencies effect with multi-channel operation. The switching PWM controller drives two internal N-Channel MOSFETs in a synchronous-rectified buck converter topology.

Features

? Up to 2A Continuous Output Current

? Integrated MOSFETs for Small Regulator Footprint

? Adjustable Switching Frequency, 500kHz to 1.2MHz

? Tight Output Voltage Regulation, ±1 Over-temperature

? Wide Input Voltage Range, 5V ±10 or 5.5V to 14V

? Wide Output Voltage Range, from 0.6V

? Simple Single-Loop Voltage-Mode PWM Control Design

? Input Voltage Feed-Forward for Constant Modulator Gain

? Fast PWM Converter Transient Response

? Lossless rDS(ON) High Side and Low Side Overcurrent Protections

? Undervoltage Detection

? Integrated Thermal Shutdown Protection

? Power-Good Indication

? Adjustable Soft-Start

? Start-Up with Pre-Bias Output

? Pb-free (RoHS Compliant)

Applications

? Point of Load Applications

? Graphics Cards - GPU and Memory Supplies

? ASIC Power Supplies

? Embedded Processor and I/O Supplies

? DSP Supplies