ISL61851HCBZ集成電路（IC）的熱插拔控制器規(guī)格書PDF中文資料

The ISL6185 USB power controller family provides fully

independent overcurrent (OC) fault protection for two or more

USB ports.

This product family consists of sixteen individual functional

product variants and three package options. It is operation

rated for a nominal +2.5V to +5V range and is specified over the

full commercial and industrial temperature ranges.

Each ISL6185 type incorporates in a single package two 71mΩ

P-channel MOSFET power switches for power control. Each

features internal current monitoring, accurate current limiting,

and current limited delay to turn-off, for system supply

protection along with control and communication I/O.

The ISL6185 family offers product variants with specified

continuous output current levels of 0.6A, 1.1A, 1.5A or 1.8A; enable

active high or low inputs; and latch off or automatic retry after

overcurrent turn-off, making these devices well suited for many

low-power applications.

This family of ICs is offered in an industry-standard SOIC pinout

and also in the 70 smaller 3x3 DFN packages providing similar

or enhanced performance in the smallest possible package.

Features

? 2.5V to 5V Operating Range

? 71mΩ Integrated Power P-channel MOSFET Switches

? Continuous Current Options for 0.6A, 1.1A, 1.5A and 1.8A

? Thermally Insensitive 12ms of Current Limiting Prior to

Turn-Off

? Output Discharges with Reverse Current Blocking When

Disabled

? Latch-off or Auto Restart Options

? 1μA Off-State Supply Current

? Enable Polarity Options

? Industry-standard Pin for Pin SOIC, and Smaller DFN Packages

Available

? UL Recognized, File Number: E333469

Applications

? USB 1, 2, 3 Port Power Management

? Low Power (18W) Electronic Circuit Limiting and Breaker