ISL41387IRZ集成電路（IC）的驅(qū)動器接收器收發(fā)器規(guī)格書PDF中文資料

These devices are BiCMOS interface ICs that are user

configured as either a single RS-422, RS-485 differential

transceiver, or as a dual (2 Tx, 2 Rx) RS-232 transceiver.

In RS-232 mode, the on-board charge pump generates RS-232

compliant ±5V Tx output levels, from a supply as low as 4.5V.

Four small 0.1μF capacitors are required for the charge pump.

The transceivers are RS-232 compliant, with the Rx inputs

handling up to ?25V, and the Tx outputs handling ±12V.

In RS-485 mode, the transceivers support both the RS-485

and RS-422 differential communication standards. The

RS-485 receiver features full fail-safe operation, so the Rx

output remains in a high state if the inputs are open or shorted

together. The RS-485 transmitter supports up to three data

rates, two of which are slew rate limited for problem free

communications. The charge pump disables in RS-485 mode,

thereby saving power, minimizing noise, and eliminating the

charge pump capacitors.

Both RS-232, RS-485 modes feature loopback and shutdown

functions. The loopback mode internally connects the Tx

outputs to the corresponding Rx input, which facilitates the

implementation of board level self test functions. The outputs

remain connected to the loads during loopback, so connection

problems (e.g., shorted connectors or cables) can be detected.

The shutdown mode disables the Tx and Rx outputs, disables

the charge pump if in RS-232 mode, and places the IC in a low

current (35μA) mode.

The ISL41387 is a QFN packaged device that offers additional

functionality, including a lower speed and edge rate option

(115kbps) for EMI sensitive designs, or to allow longer bus

lengths. It also features a logic supply voltage pin (VL) that sets

the VOH level of logic outputs, and the switching points of logic

inputs, to be compatible with another supply voltage in mixed

voltage systems. The QFN's choice of active high or low Rx

enable pins increases design flexibility, allowing Tx/Rx

direction control via a single signal by connecting DEN and

RXEN together.

Features

? 5V powered, user selectable RS-232 or RS-485, RS-422

interface port (two RS-232 transceivers or one RS-485,

RS-422 transceiver)

? ±15kV (HBM) ESD protected bus pins (RS-232 or RS-485)

? True flow-through pinouts simplify board layouts

? Pb-Free (RoHS compliant)

? Large (2.7V) differential VOUT for improved noise immunity

in RS-485, RS-422 networks

? Full fail-safe (open/short) Rx in RS-485, RS-422 mode

? Loopback mode facilitates board self test functions

? User selectable RS-485 data rates . . . . . . . . . . . . . . 20Mbps

- Slew rate limited . . . . . . . . . . . . . . . . . . . . . . . . . . . 460kbps

- Slew rate limited (ISL41387 only) . . . . . . . . . . . . . 115kbps

? Fast RS-232 data rate . . . . . . . . . . . . . . . . . . . . up to 650kbps

? Low current shutdown mode . . . . . . . . . . . . . . . . . . . . . . 35μA

? QFN package saves board space (ISL41387 only)

? Logic supply pin (VL) eases operation in mixed supply

systems (ISL41387 only)

Applications

? Gaming applications (e.g., slot machines)

? Single board computers

? Factory automation

? Security networks

? Industrial/process control networks

? Level translators (e.g., RS-232 to RS-422)

? Point of sale equipment