High ESD Protected, +125°C, 40Mbps, 3.3V, Full Fail-Safe RS-485/RS-422 Transceivers

The ISL3179E and ISL3180E are high ESD protected (see Table 2 on page 2), 3.3V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each device has low bus currents (+220μA/-150μA), so they present a “1/5 unit load” to the RS-485 bus. This allows up to 160 transceivers on the network without violating the RS-485 specification’s 32 unit load maximum, and without using repeaters.

Features

? High ESD protection on RS-485 I/O pins

- ISL3179E. . . . . . . . . . . . . . . . . . . . . . . . . ±16.5kV IEC61000

- ISL3180E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±12kV HBM

- Class 3 HBM level on all other pins (ISL3179E) . . . . . >9kV

? Specified for +125°C operation

? High data rates. . . . . . . . . . . . . . . . . . . . . . . . . . . up to 40Mbps

? 5V tolerant logic inputs

? 1/5 unit load allows up to 160 devices on the bus

? Full fail-safe (open, shorted, terminated/undriven) receiver

? Hot plug - Tx and Rx outputs remain three-state during power-up

? Low quiescent current . . . . . . . . . . . . . . . . . . . . . . . 4mA (max)

? Low current shutdown mode . . . . . . . . . . . . . . . . . 1μA (max)

? -7V to +12V common-mode input voltage range

? Three-state Rx and Tx outputs

? 16/16.5ns (max) Tx/Rx propagation delays; 1.5ns (max) skew

? Operates from a single +3.3V supply (10 tolerance)

? Current limiting and thermal shutdown for driver overload protection

? Pb-free (RoHS compliant)

Applications

? Motor controller/position encoder systems

? Factory automation

? Field bus networks

? Security networks

? Building environmental control systems

? Industrial/process control networks

ISL3179EFBZ屬于集成電路（IC） > 驅動器，接收器，收發器。瑞薩科技有限公司制造生產的ISL3179EFBZ驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。