IS24C52-3ZI中文資料北京矽成數(shù)據(jù)手冊PDF規(guī)格書

DESCRIPTION

The IS24C52 is an electrically erasable PROM device that uses the standard 2-wire interface for communications. The IS24C52 contains a memory array of 2,048-bits (256K x 8), and is further subdivided into 16 pages of 16 bytes each for page-write mode. The software write-protection feature is initiated with a unique irreversible instruction. After this command is transmitted, the first 128 bytes of the array become permanently read-only. This feature is popular in applications like DRAM DIMMs to retain DRAM related data. This EEPROM is offered in wide operating voltages of 1.8V to 5.5V (IS24C52-2) and 2.5V to 5.5V (IS24C52-3) to be compatible with most application voltages. ISSI designed the IS24C52 as a low-cost and low-power 2-wire EEPROM solution. The devices are packaged in 8-pin SOIC, and 8-pin TSSOP, and 8-pin MSOP.

FEATURES

? Two-Wire Serial Interface

– Bidirectional data transfer protocol

– 400 kHz (I2C TM Protocol) Compatibility

? Organization:

– 256-bit x 8-bit

? Data Protection Features

– Write Protect Pin

– Permanent Software Protection

? 16-Byte Page Write Buffer

– Partial Page-writes permitted

? Low Power CMOS Technology

– Active Current less than 2 mA (5V)

– Standby Current less than 6 μA (5V)

– Standby Current less than 2 μA (2.5V)

? Low Voltage Operation

– IS24C52-2: Vcc = 1.8V to 5.5V

– IS24C52-3: Vcc = 2.5V to 5.5V

? Random or Sequential Read Modes

? Filtered Inputs for Noise Suppression

? Self timed Write cycle with auto clear

– 5 ms @ 2.5V

? High Reliability

– Endurance: 1,000,000 Cycles

– Data Retention: 40 Years

? Commercial and Industrial temperature ranges

? 8-pin SOIC, 8-pin TSSOP, and 8-pin MSOP