IR213集成電路（IC）的柵極驅動器規格書PDF中文資料

IR213屬于集成電路（IC）的柵極驅動器。由英飛凌科技股份公司制造生產的IR213柵極驅動器柵極驅動器電源管理集成電路 (PMIC) 可用于提供隔離、放大、參考位移、自舉或其他必要功能，這些功能可將來自電源轉換應用中控制設備的信號連接到電源被控制通過的半導體設備（通常為 FET 或 IGBT）。任何特定設備提供的確切功能各不相同，但與它適合驅動的半導體配置相關。

Description

The IR2136x (J&S) are high voltage, high speed power MOSFET and IGBT drivers with three independent high and low side referenced output channels for 3-phase applications. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 3.3 V logic. A current trip function which terminates all six outputs can be derived from an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. An open-drain FAULT signal is provided to indicate that an overcurrent or undervoltage shutdown has occurred. Overcurrent fault conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600 V.

Features

? Floating channel designed for bootstrap operation

? Fully operational to +600 V

? Tolerant to negative transient voltage, dV/dt immune

? Gate drive supply range from 10 V to 20 V (IR2136/

?? IR21368), 11.5 V to 20 V (IR21362D), or 12 V to 20 V

?? (IR21363/IR21365/IR21366/IR21367)

? Undervoltage lockout for all channels

? Over-current shutdown turns off all six drivers

? Independent 3 half-bridge drivers

? Matched propagation delay for all channels

? Cross-conduction prevention logic

? Low side output out of phase with inputs. High side outputs

?? out of phase (IR213(6,63, 65, 66, 67, 68)), or in phase

?? (IR21362) with inputs

? 3.3 V logic compatible

? Lower di/dt gate drive for better noise immunity

? Externally programmable delay for automatic fault clear

? All parts are LEAD-FREE