IMP706TCPA中文資料A1PROS數(shù)據(jù)手冊PDF規(guī)格書

3/3.3/4.0V μP Supervisor Circuits

– Low supply current

– Watchdog timer

– Brownout detection

The IMP706P/R/S/T/J and IMP708R/S/T/J CMOS supervisor circuits monitor power-supply and battery voltage level, and μP/μC operation. A reset is generated when the supply drops below 2.63V (IMP706P/R, IMP708R), 2.93V (IMP706S, IMP708S), 3.08V (IMP706T, IMP708T) or 4.00 (IMP706J, IMP708J).

The family offers several functional options. Each device generates a reset signal during power-up, power-down and during brownout conditions.

Key Features

◆ Lower power, pin compatible replacements for Maxim MAX706P/R/S/T, MAX708R/S/T

?? – 30 lower supply current:140μA vs. 200μA

◆ Precision power supply monitor

?? – 2.63V threshold (IMP706P/R, IMP708R)

?? – 2.93V threshold (IMP706S, IMP708S)

?? – 3.08V threshold (IMP706T, IMP708T)

?? – New 4.00V threshold (IMP706J, IMP708J)

◆ Debounced manual reset input

◆ Auxiliary voltage monitor comparator

?? – 1.25V threshold

?? – Battery monitor/auxiliary supply monitor

◆ Watchdog timer (IMP706P/R/S/T/J)

?? – Watchdog can be disabled by floating WDI

◆ 200ms reset time delay

◆ Three reset signal options

?? – Active HIGH: IMP706P

?? – Active LOW: IMP706R/S/T/J

?? – Active HIGH & LOW outputs: IMP708R/S/T/J

◆ DIP, SO and MicroSO packages

◆ Guaranteed RESET assertion to VCC = 1.1V

Applications

◆ Computers and controllers

◆ CTI applications

◆ Embedded controllers

◆ Battery operated systems

◆ Intelligent instruments

◆ Wireless communication systems

◆ PDAs and handheld equipment

?