HT23-398中文資料安普數據手冊PDF規格書
HT23-398規格書詳情
Features
? Programmable for stand alone operation with Applied
Motion’s easy to use Si Programmer? Windows software
(software and programming cable included)
? Can be operated in real time from a host PC or PLC using Applied
Motion’s Si Command Language? (SCL)
? Can be networked with all other Si? products via Applied
Motion’s SiNet? Hub
? DC bus voltage 24-80 VDC motor supply (including ripple)
? Software selectable from 0.8–7.0 amps/phase motor current
? Software selectable Step resolutions from 2,000 to 50,800
steps per revolution
? Software selectable idle current reduction 0, 25, 50
or 100
? 8 user programmable inputs
? 3 optically isolated 24 VDC outputs
? Short circuit and over temperature protection
? Communication via RS232
? 560 watts of usable power
? Screw terminal connector blocks for power and motor,
Wago cage clamp connector for I/O. RJ11 for RS232 port
? MOSFET, dual H-bridge, inaudible PWM amplifier
? 3 state, pulse width modulated current control, switching at
20–30 kHz
? Optional operator terminal (MMI) either standard or backlit
? Drives 4, 6 or 8 lead size 11, 14, 17, 23 and 34 step motors
? CE compliant
Description
The 7080i is a programming step motor driver suitable for a wide
range of motion control applications. It includes a sophisticated
controller integrated with a 560-watt microstepping amplifier.
The 7080i includes Applied Motion’s easy to use Si Programmer
? Windows software for the rapid development of stand
alone motion control programs. The 7080i can also be commanded
in real time from a host PC or PLC, using the Si Command
Language?.
For multi-axis applications, up to eight Applied Motion Si?
drives (stepper or Servo) can be networked using a single
SiNet? Hub.
The 7080i includes 8 programmable inputs for triggering,
branching, position sensing and end of travel detection. 3 optically
isolated programmable outputs can send signals to other
electronic devices and activate relays.
The 7080i is a PC board mounted on an aluminum angle heat
transfer chassis. Drive dimensions are 2? by 3? by 6?.
產品屬性
- 型號：
HT23-398
- 功能描述：
步進電機 2.13in 177.0 TORQUE
- RoHS：
否
- 制造商：
Applied Motion
- 連接：
Series
- 框架大小(NEMA)：
23
- 步距角：
1.8 deg
- 管腳或?qū)Ь€計數：
8
- 電壓額定值：
3.3 V
- 電流額定值：
2.12 A
- 最小保持力矩：
177 oz-in
- 轉子慣性：
1.64 oz-in-sq
- 尺寸：
54.1 mm x 56.4 mm x 56.4 mm
| 供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
|---|---|---|---|---|---|---|---|
HTCSEMI(海天芯) |
23+ |
SOP8 |
6000 |
誠信服務，絕對原裝原盤 |
詢價 | ||
24+ |
SOP |
20 |
詢價 | ||||
HOTEL |
2407+ |
QFP |
7750 |
原裝現貨!實單直說!特價! |
詢價 | ||
APPLIED |
新 |
3 |
全新原裝 貨期兩周 |
詢價 | |||
HTCSEMI |
24+ |
SOP-8 |
30 |
C72-晶體管 |
詢價 | ||
SANYO |
2020+ |
SOT-143 |
80000 |
只做自己庫存,全新原裝進口正品假一賠百,可開13%增 |
詢價 | ||
TI/德州儀器 |
22+ |
TSSOP20 |
25000 |
只做原裝,原裝,假一罰十 |
詢價 | ||
HTCSEMI |
24+ |
con |
30 |
現貨常備產品原裝可到京北通宇商城查價格https://www.jbchip.com/index |
詢價 | ||
HTCSEMI |
30 |
詢價 | |||||
HOLTEK |
1922+ |
SOP |
10000 |
公司進口原裝特價處理 |
詢價 |
