The HIP6602 is a high frequency, two power channel MOSFET driver specifically designed to drive four power N-Channel MOSFETs in a synchronous-rectified buck converter topology. These drivers combined with a HIP63xx series of Multi-Phase Buck PWM controller and Intersil’s UltraFETs? form a complete core voltage regulator solution for advanced microprocessors.

The HIP6602 drives both upper and lower gates over a range of 5V to 12V. This drive-voltage flexibility provides the advantage of optimizing applications involving trade-offs between switching losses and conduction losses.

The output drivers in the HIP6602 have the capacity to efficiently switch power MOSFETs at high frequencies. Each driver is capable of driving a 3000pF load with a 30ns propagation delay and 50ns transition time. This device implements bootstrapping on the upper gates with only a single external capacitor required for each power channel. This reduces implementation complexity and allows the use of higher performance, cost effective, N-Channel MOSFETs. Adaptive shoot-through protection is integrated to prevent both MOSFETs from conducting simultaneously.

Features

? Drives Four N-channel MOSFETs

? Adaptive Shoot-Through Protection

? Internal Bootstrap Devices

? Supports High Switching Frequency

- Fast Output Rise Time

- Propagation Delay 30ns

? Small 14-Lead SOIC Package

? 5V to 12V Gate-Drive Voltages for Optimal Efficiency

? Three-State Input for Bridge Shutdown

? Supply Under-Voltage Protection

Applications

? Core Voltage Supplies for Intel Pentium? III and AMD? Athlon? Microprocessors.

? High Frequency Low Profile DC/DC Converters

? High Current Low Voltage DC/DC Converters