HA16116中文資料瑞薩數(shù)據(jù)手冊PDF規(guī)格書

Description

HA16116FP/FPJ and HA16121FP/FPJ are dual-channel PWM switching regulator controller ICs for use in

chopper-type DC/DC converters.

This IC series incorporates totem pole gate drive circuits to allow direct driving of a power MOS FET. The output logic is preset for booster, step-down, or inverting control in a DC/DC converter. This logic assumes use of an N-channel power MOS FET for booster control, and a P-channel power MOS FET for step-down or inverting control.

Features

? Wide operating supply voltage range* (3.9 V to 40.0 V)

? Wide operating frequency range (600 kHz maximum operation)

? Direct power MOS FET driving (output current ±1 A peak in maximum rating)

? Pulse-by-pulse overcurrent protection circuit with intermittent operation function (When overcurrent state continues beyond time set in timer, the IC operates intermittently to prevent excessive output current.)

? Grounding the ON/OFFpin turns the IC off, saving power dissipation. (HA16116: IOFF = 10 μA max.; HA16121: IOFF = 150 μA max.)

? Built-in UVL circuit (UVL voltage can be varied with external resistance.)

? Built-in soft start and quick shutoff functions

Note: The reference voltage 2.5 V is under the condition of VIN ≥4.5 V.

Functions

? 2.5 V reference voltage (Vref) regulator

? Triangle wave form oscillator

? Dual overcurrent detector

? Dual totem pole output driver

? UVL (under voltage lock out) system

? Dual error amplifier

? Vref overvoltage detector

? Dual PWM comparator