DS1350ABP-70-IND中文資料亞德諾數(shù)據(jù)手冊(cè)PDF規(guī)格書

DESCRIPTION

The DS1350 4096k Nonvolatile SRAMs are 4,194,304-bit, fully static, nonvolatile SRAMs organized as 524,288 words by 8 bits. Each NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors VCC for an out-of-tolerance condition. When such a condition occurs, the lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption. Additionally, the DS1350 devices have dedicated circuitry for monitoring the status of VCC and the status of the internal lithium battery. DS1350 devices in the PowerCap Module package are directly surface mountable and are normally paired with a DS9034PC PowerCap to form a complete Nonvolatile SRAM module. The devices can be used in place of 512k x 8 SRAM, EEPROM or Flash components.

FEATURES

■ 10 years minimum data retention in the

absence of external power

■ Data is automatically protected during power loss

■ Power supply monitor resets processor when

VCC power loss occurs and holds processor in

reset during VCC ramp-up

■ Battery monitor checks remaining capacity

daily

■ Read and write access times as fast as 70 ns

■ Unlimited write cycle endurance

■ Typical standby current 50 μA

■ Upgrade for 512k x 8 SRAM, EEPROM or

Flash

■ Lithium battery is electrically disconnected to

retain freshness until power is applied for the

first time

■ Full ±10 VCC operating range (DS1350Y)

or optional ±5 VCC operating range

(DS1350AB)

■ Optional industrial temperature range of

-40°C to +85°C, designated IND

■ New PowerCap Module (PCM) package

- Directly surface-mountable module

- Replaceable snap-on PowerCap provides

lithium backup battery

- Standardized pinout for all nonvolatile

SRAM products

- Detachment feature on PowerCap allows

easy removal using a regular screwdriver