DRV8800

40-V, 2.8-A brushed DC motor driver; ? H-Bridge Motor Driver\n? Low RDS(on) MOSFETs (0.4-? Typical)\n? Low-Power Sleep Mode\n? 100% PWM Duty Cycle Supported\n? 8-V to 36-V Operating Supply Voltage Range\n? Thermally Enhanced Surface-Mount Package\n? Protection Features: \n? VBB Undervoltage Lockout (UVLO)\n? Charge Pump Undervoltage (CPUV)\n? Overcurrent Protection (OCP)\n? Short-to-Supply Protection\n? Short-to-Ground Protection\n? Overtemperature Warning (OTW)\n? Overtemperature Shutdown (OTS)\n? Fault Condition Indication Pin (nFAULT);

The DRV880x provides a versatile motor driver solution with a variety of capabilities. The device contains a full H-bridge which can be used to drive a brushed DC motor, one winding of a stepper motor, or other devices such as solenoids. A simple PHASE-ENABLE interface allows easy interfacing to controller circuits.\n\nThe output stages use N-channel power MOSFETs configured as an H-bridge. The DRV880x is capable of peak output currents up to ±2.8 A and operating voltages up to 36 V. An internal charge pump generates the needed gate drive voltages.\n\nA low-power sleep mode is provided which shuts down internal circuitry to achieve a very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin.\n\nInternal protection functions are provided for undervoltage, charge pump fault, overcurrent, short-to-supply, short-to-ground, and overtemperature. Fault conditions are indicated through the nFAULT pin.\n\nThe DRV880x is packaged in a 16-pin WQFN package with PowerPAD? (Eco-friendly: RoHS & no Sb/Br).

DRV8800

DMOS FULL-BRIDGE MOTOR DRIVERS

DRV8800

DMOS FULL-BRIDGE MOTOR DRIVERS

DRV8800

DMOS FULL-BRIDGE MOTOR DRIVERS

DRV8800_10

DMOS FULL-BRIDGE MOTOR DRIVERS

DRV8800_12

DMOS FULL-BRIDGE MOTOR DRIVERS

DRV8800_15

DRV880x DMOS Full-Bridge Motor Drivers

DRV8800A0RTY

DMOS FULL-BRIDGE MOTOR DRIVERS

DRV8800PWP

DMOS FULL-BRIDGE MOTOR DRIVERS

DRV8800PWPR

DMOS FULL-BRIDGE MOTOR DRIVERS