DRV81602-Q1

DRV81602-Q1: 8-Channel Configurable Low-side and High-side Driver for Automotive Relay, LED, Lighting and Motor Control

1Features ?3Vto40VAnalogsupplyvoltage –Crankingcapabilitydownto3V –SupportsLV124standard ?3Vto5.5VDigitalsupplyvoltage –Compatiblewith3.3Vand5Vmicrocontrollers ?44Vminimumdraintosourceclampingvoltage ?-19Vmaximumsourcetogroundclampingvoltage ?RDS(O

DRV81602-Q1

DRV81620-Q1: 8-Channel Configurable Low-side and High-side Driver for Automotive Relay, LED, Lighting and Motor Control

1Features ?3Vto40VAnalogsupplyvoltage –Crankingcapabilitydownto3V –SupportsLV124standard ?3Vto5.5VDigitalsupplyvoltage –Compatiblewith3.3Vand5Vmicrocontrollers ?44Vminimumdraintosourceclampingvoltage ?-19Vmaximumsourcetogroundclampingvoltage ?RDS(O

DRV81602-Q1

DRV81080-Q1: 8-Channel, 40V, 700mΩ, Fully Protected High-side Driver for Automotive LED, Lighting and Motor Control

1Features ?AEC-Q100qualifiedforautomotiveapplications –Temperaturegrade1:–40°Cto+125°C,TA ?FunctionalSafety-Capable –Documentationtoaidfunctionalsafetydesign ?3Vto40VAnalogsupplyvoltage –Crankingcapabilitydownto3V –SupportsLV124automotivestandard ?3Vto

DRV81602-Q1

DRV81242-Q1: 8-Channel, 40V, 700mΩ, Fully Protected, Configurable Low-side and High-side Driver for Automotive Relay, LED, Lighting and Motor Control

1Features ?AEC-Q100qualifiedforautomotiveapplications –Temperaturegrade1:–40°Cto+125°C,TA ?FunctionalSafety-Capable –Documentationtoaidfunctionalsafetydesign ?3Vto40VAnalogsupplyvoltage –Crankingcapabilitydownto3V –SupportsLV124automotivestandard ?3Vto

DRV81602-Q1

DRV81620-Q1: 8-Channel, 40V, 700mΩ, Fully Protected, Configurable Low-side and High-side Driver for Automotive Relay, LED, Lighting and Motor Control

1Features ?AEC-Q100qualifiedforautomotiveapplications –Temperaturegrade1:–40°Cto+125°C,TA ?FunctionalSafety-Capable –Documentationtoaidfunctionalsafetydesign ?3Vto40VAnalogsupplyvoltage –Crankingcapabilitydownto3V –SupportsLV124automotivestandard ?3Vto

DRV81602-Q1

具有跛行回家功能的汽車級 40V、6 通道可配置、2 通道低側驅動器; ? 3V to 40V Analog supply voltage \n? Cranking capability down to 3V\n? Supports LV124 standard\n \n? 3V to 5.5V Digital supply voltage \n? Compatible with 3.3V and 5V microcontrollers\n \n? 44V minimum drain to source clamping voltage\n? -19V maximum source to ground clamping voltage\n? RDS(ON): 630mΩ typical at 12V, 25 °C\n? Current: 330mA per output at 85 °C, with all channels ON\n? 2 parallel inputs with mapping functionality\n? Fail-safe activation in Limp Home mode \n? Using nSLEEP and IN pins\n \n? Two independent internal PWM generators\n? Bulb Inrush Mode (BIM) to drive lamps \n? For 2W/5W lamps and other capacitive loads\n \n? Low-current sleep mode \n? \n? 16-bit SPI interface for control and diagnosis \n? Daisy Chain capability\n? Compatible with 8-bit SPI devices\n \n? Supports various protection features - \n? Reverse battery protection\n? Short circuit to ground and battery protection\n? Stable behavior at under voltage conditions\n? Over Current latch OFF\n? Overtemperature warning\n? Thermal shutdown latch OFF\n? Overvoltage protection\n? Loss of battery and loss of ground protection\n? Electrostatic discharge (ESD) protection\n \n? Supports several diagnostic features - \n? Diagnostic information via SPI register\n? Over Load detection at ON state\n? Open Load detection in ON and OFF state\n? Input and Output Status Monitor;

The DRV81602-Q1 is an eight channel low-side and high-side switch with integrated protection and diagnostics. It is designed to control relays, LEDs, Lamps and motors in automotive and industrial applications.\n\nA serial peripheral interface (SPI) with daisy chain capability is utilized for control and diagnosis of the loads as well as of the device. Two input pins with mapping functionality are available for direct control of the outputs. The device supports Limp Home mode for fail-safe activation. Integrated PWM generators enable driving LEDs, and bulb inrush mode enables driving loads with large capacitance.\n\nThe DRV81602-Q1 supports various protection features such as undervoltage, overvoltage, short circuit and open load detection. High level of integration with embedded protection and diagnostic features make the DRV81602-Q1 an ideal choice for automotive body and powertrain applications.