General Description

The CS2100-CP is an extremely versatile system clocking device that utilizes a programmable phase lock loop. The CS2100-CP is based on a hybrid ana log-digital PLL architecture comprised of a unique combination of a Delta-Sigma Fractional-N Frequency Synthesizer and a Digital PLL. This architecture allows for generation of a low-jitter clock relative to an external noisy synchronization clock at frequencies as low as 50 Hz. The CS2100-CP supports both I2C and SPI for full software control.

Features

Clock Multiplier / Jitter Reduction

– Generates a Low Jitter 6 - 75 MHz Clock from a Jittery or Intermittent 50 Hz to 30 MHz Clock Source

Highly Accurate PLL Multiplication Factor

– Maximum Error Less Than 1 PPM in High Resolution Mode

I2C?/ SPI? Control Port

Configurable Auxiliary Output

Flexible Sourcing of Reference Clock

– External Oscillator or Clock Source

– Supports Inexpensive Local Crystal

Minimal Board Space Required

– No External Analog Loop-filter Components