CL-PS6700-VC-A中文資料凌云邏輯數(shù)據(jù)手冊PDF規(guī)格書

OVERVIEW

The CL-PS6700 connects directly to a PC Card (PCMCIA) Release 2.01 socket and has a custom interface to the CL-PS7111 microcontroller. The CL-PS7111 can support up to two CL-PS6700 devices, which allows up to two PC Card sockets per system. Addresses and data are passed to the CL-PS6700 through 16 bits of the 32-bit Data bus (D[15:0]).

FEATURES

■ Direct interface to CL-PS7111 low-power microcontroller

— Custom multiplexed address/data bus for low pin count

— Supports 13- and 18-MHz operating frequencies

■ Fully compatible with PC Card (PCMCIA) Release 2.01 specification

■ One or two CL-PS6700s per system

■ Low power states

— Operating (25 mW, typical)

— Idle

— Standby (virtually zero power drain)

■ Support for PC Card hot insertion and removal

■ Read and write buffers

■ Support for 3.3- and 5-V PC Cards

■ Endian conversion

■ Supports the following PC Cards:

— Memory-only card; flash, EPROM, or SRAM

— I/O card; modem and communications

— Cards configured as both I/O and memory

— DMA-capable cards (through software emulation)

■ 100-pin VQFP package