AP8366M7R-Y中文資料創瑞科技數據手冊PDF規格書

DESCRIPTION

The AP8366 consists of a Low Standby-Power Quasi-Resonant (QR) Primary-Side controller and a avalanche-rugged smart power VDMOSFET (AP8366-A/B 700V, AP8366-C 800V), specifically designed for a high performance AC/DC charger or adaptor with minimal external components. AP8366 operates in primary-side sensing and regulation, so opto-coupler and A431 could be eliminated.

Because of internal HV Start-up circuit, the system with AP8366 can achieve less than 30mW standby power consumption (230VAC).

In CV mode, multi-mode and quasi resonant technique is utilized to achieve high efficiency, avoid audible noise and make the system meeting Energy star class VI. Good load regulation is achieved by the built-in cable drop compensation. In CC mode, the current and output power setting can be adjusted externally by the sense resistor RCS at CS pin. AP8366 offers complete protections including Cycle-by-Cycle current limiting protection (OCP), over voltage protection (OVP), over temperature protection (OTP) and CS open or short protection (CSO/SP) etc.

The AP8366 is available in SOP7 package.

FEATURES

? Internal avalanche-rugged smart power VDMOSFET

? Internal HV Start-up Circuit, Standby power consumption < 30mW at 230VAC

? Multi-mode and Quasi-Resonant technique achieve high efficiency, meeting energy star class VI

? ±5 CC Regulation at Universal AC input

? Primary-side Sensing and Regulation without A431 and Opto-coupler

? Programmable Cable Drop Compensation

? No-need Control Loop Compensation Capacitance

? Excellent Protection Coverage:

? Over Temperature Protection (OTP)

? VDD Under/Over Voltage Protection (UVLO&OVP)

? Cycle-by-Cycle Current Limiting (OCP)

? CS Short/Open Protection (CS O/SP)

? CV mode accurate: ±5

? Available in SOP7 Package

APPLICATION

? Switch AC/DC Adaptor

? Battery Charger