ALD1110ESA中文資料ALD數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

ALD1108E/ALD1110E are monolithic quad/dual EPADs (Electrically Programmable Analog Device) that utilize CMOS MOSFET with electrically programmable threshold voltage. For a given input voltage,changing the threshold turn-on voltage of a MOSFET device precisely changes its drain on-current, resulting in an on-resistance characteristic that can be precisely set and controlled. Used as an in-circuit element for trimming or setting a combination of voltage and/or current characteristics, it can be programmed via a Personal Computer remotely and automatically via software control. Once programmed and set, the set voltage and current levels are stored indefinitely inside the device as a precisely controlled nonvolatile stored charge, which is not affected during normal operation of the device, even after power has been turned off.

FEATURES

? Operates from 2V, 3V, 5V to 10V

? Flexible basic circuit building block and design element

? Very high resolution -- average programmable voltage resolution of 0.1mV

? Wide dynamic range -- current levels from 0.1μA to 3000μA

? Voltage adjustment range from 1.000V to 3.000V in 0.1mV steps

? Proven, non-volatile CMOS technology

? Typical 10 years drift of less than 2mV

? Usable in voltage mode or current mode

? High input impedance -- 1012?

? Very high DC current gain -- greater than 109

? Device operating current has positive temperature

coefficient range and negative temperature

coefficient range with cross-over zero temperature

coefficient current level at 68μA

? Tight matching and tracking of on-resistance between different devices with programming

? Very low input currents and leakage currents

? Low cost, monolithic technology

? Application-specific or in-system programming modes

? User programmable software-controlled automation

? User programmability of any standard/custom configuration

? Micropower operation

? Available in standard PDIP, SOIC and hermetic CDIP packages

? Suitable for matched-pair balanced circuit configuration

? Suitable for both coarse and fine trimming applications