ADP7118UJ-EVALZ開發板套件編程器的評估板-線性穩壓器規格書PDF中文資料

ADP7118UJ-EVALZ屬于開發板套件編程器的評估板-線性穩壓器。由亞德諾半導體技術有限公司制造生產的ADP7118UJ-EVALZ評估板 - 線性穩壓器線性穩壓器評估板是裝有元器件的電路板，用于提供特定線性穩壓器或器件的工作實例。每個 IC 的通道類型有單通道、雙通道、三通道和四通道，穩壓器類型包括負可調、負固定、正可調、正固定、正負可調、正固定/可調。電壓輸出范圍為 -15V 至 56V，電流輸出范圍為 10mA 至 5A。

GENERAL DESCRIPTION

The ADP7118 is a CMOS, low dropout (LDO) linear regulator that operates from 2.7 V to 20 V and provides up to 200 mA of output current. This high input voltage LDO is ideal for the regulation of high performance analog and mixed-signal circuits operating from 20 V down to 1.2 V rails. Using an advanced proprietary architecture, the device provides high power supply rejection, low noise, and achieves excellent line and load transient response with a small 2.2 μF ceramic output capacitor. The ADP7118 regulator output noise is 11 μV rms independent of the output voltage for the fixed options of 5 V or less.

The ADP7118 is available in 16 fixed output voltage options.

The following voltages are available from stock: 1.2 V (adjustable), 1.8 V, 2.5 V, 3.3 V, 4.5 V, and 5.0 V.

Additional voltages available by special order are 1.5 V, 1.85 V, 2.0 V, 2.2 V, 2.75 V, 2.8 V, 2.85 V, 3.8 V, 4.2 V, and 4.6 V.

Each fixed output voltage can be adjusted above the initial set point with an external feedback divider. This allows the ADP7118 to provide an output voltage from 1.2 V to VIN ? VDO with high PSRR and low noise.

User programmable soft start with an external capacitor is available in the LFCSP and SOIC packages.

The ADP7118 is available in a 6-lead, 2 mm × 2 mm LFCSP making it not only a very compact solution, but it also provides excellent thermal performance for applications requiring up to 200 mA of output current in a small, low profile footprint. The ADP7118 is also available in a 5-lead TSOT and an 8-lead SOIC.

FEATURES

Low noise: 11 μV rms independent of fixed output voltage

PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz,

VOUT ≤ 5 V, VIN = 7 V

Input voltage range: 2.7 V to 20 V

Maximum output current: 200 mA

Initial accuracy: ±0.8

Accuracy over line, load, and temperature

±1.1, TJ = ?40°C to +85°C

±1.8, TJ = ?40°C to +125°C

Low dropout voltage: 200 mV (typical) at a 200 mA load,

VOUT = 5 V

User programmable soft start (LFCSP and SOIC only)

Low quiescent current, IGND = 50 μA (typical) with no load

Low shutdown current: 1.8 μA at VIN = 5 V, 3.0 μA at VIN = 20 V

Stable with a small 2.2 μF ceramic output capacitor

Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 4.5 V, and 5.0 V

16 standard voltages between 1.2 V and 5.0 V are available

Adjustable output from 1.2 V to VIN – VDO, output can be

adjusted above initial set point

Precision enable

2 mm × 2 mm, 6-lead LFCSP, 8-Lead SOIC, 5-Lead TSOT

APPLICATIONS

Regulation to noise sensitive applications

ADC and DAC circuits, precision amplifiers, power for

VCO VTUNE control

Communications and infrastructure

Medical and healthcare

Industrial and instrumentation

Supported by ADIsimPower tool