ADP5063開發板套件編程器的評估演示板及套件規格書PDF中文資料

ADP5063屬于開發板套件編程器的評估演示板及套件。由亞德諾半導體技術有限公司制造生產的ADP5063評估和演示板及套件該系列產品提供了一種方便的方法，在經過驗證的實施環境中評估某些重點器件的性能或特性。評估方法通常有完善的文檔說明，并且視乎具體情況由評估軟件提供支持。產品通常由印刷電路板組成，板上已裝有重點器件以及必要或有用的支持元器件，另外也可能包括其他組件，例如電纜或電源。對于數量特別多或類別獨特的器件類別(如 ADC、DAC 和開關模式電源)，評估平臺可組合為一個單獨的產品系列。

GENERAL DESCRIPTION

The ADP5063 charger is fully compliant with USB 3.0 and the USB Battery Charging 1.2 Compliance Plan Specification, and enables charging via the mini USB VBUS pin from a wall charger, car charger, or USB host port.

The ADP5063 operates from a 4 V to 6.7 V input voltage range but is tolerant of voltages up to 20 V, thereby alleviating concerns about USB bus spikes during disconnection or connection scenarios.

FEATURES

Default charging termination voltage at 3.6 V

Fully compatible with USB 3.0 and USB Battery Charging 1.2

Compliance Plan Specification

Operating input voltage from 4 V to 6.7 V

Tolerant input voltage from ?0.5 V to +20 V (USB VBUS)

Fully programmable via I2C

Flexible digital control inputs

Up to 2.1 A current from an ac charger in LDO mode

Built-in current sensing and limiting

As low as 55 mΩ battery isolation FET between battery and

charger output

Thermal regulation prevents overheating

Compliant with JEITA1 and JEITA2 Li-Ion battery charging

temperature specifications

SYS_EN flag permits the system to be disabled until battery is at

the minimum required level for guaranteed system start-up

4 mm × 4 mm LFCSP package

APPLICATIONS

Single cell lithium iron phosphate (LiFePO4) portable

equipment

Portable medical devices

Portable instrumentation devices

Portable consumer devices