ADA4571-2傳感器變送器的位置傳感器-角度、線性位置測量規格書PDF中文資料

ADA4571-2屬于傳感器變送器的位置傳感器-角度、線性位置測量。由亞德諾半導體技術有限公司制造生產的ADA4571-2位置傳感器 - 角度、線性位置測量角度和線性位置測量傳感器使用電容、霍爾效應、電感、LVDT、LVIT、磁阻、光學或電阻技術，來確定傳感器的致動器相對于參考點的位置。角度位置傳感器可根據有限或連續旋轉范圍內的電氣或機械范圍進行區分。線性位置傳感器可根據 0 到 400 英寸的范圍進行區分。其他考慮因素包括致動器類型、輸出類型和信號、安裝類型和線性度。

GENERAL DESCRIPTION

The EVAL-ADA4571-2 shows the ADA4571-2 in an end of shaft magnet configuration. The evaluation kit is composed of an ADA4571-2 motherboard, a magnetic stimulus on a hand turnable mount, a USB interface, and an SDP-S controller board. The required LabVIEW 2013 graphical user interface (GUI) software for Windows? is available on the ADA4571-2 product page.

The EVAL-ADA4571-2 features an on-board 5 V regulator, a 6-channel simultaneous sampling analog-to-digital converter (ADC), and jumpers for enabling the temperature compensation and power-down modes within the ADA4571-2. The motherboard also features test points and unpopulated coaxial connectors for the six outputs of the device.

The SDP-S controller board controls the ADC on the motherboard reading back the ADA4571-2 outputs, to change the digital inputs to the ADA4571-2, interface with the GUI, and to supply power to the evaluation board through the USB connection.

FEATURES

USB 2.0 interface

Jumper or computer controlled temperature compensation mode enable

Jumper or computer controlled power-down mode enable

Measurement test points and coaxial connectors

EVALUATION KIT CONTENTS

ADA4571-2 magnetic stimulus

Dipole magnet

Hand movable mounting

Read back electronics

ADDITIONAL EQUIPMENT NEEDED

6 V to 12 V bench supply (optional)

SDP-S controller board

USB cable (supplied with the SDP-S controller board)

LabVIEW 2013 software downloadable from ADA4571-2 product page