GENERAL DESCRIPTION

The AD8295 contains all the components necessary for a precision instrumentation amplifier front end in one small 4 mm × 4 mm package. It contains a high performance instrumentation amplifier, two general-purpose operational amplifiers, and two precisely matched 20 kΩ resistors.

The AD8295 is designed to make PCB routing easy and efficient. The AD8295 components are arranged in a logical way so that typical application circuits have short routes and few vias. Unlike most chip scale packages, the AD8295 does not have an exposed metal pad on the back of the part, which frees additional space for routing and vias. The logical pin arrangement and routing freedom enable the AD8295 to offer simple pin-strapped solutions for complex systems in the equivalent board space of a typical MSOP package.

FEATURES

Saves board space

Includes precision in-amp, 2 op amps, and

2 matched resistors

4 mm × 4 mm LFCSP

No heat slug for more routing room

Differential output fully specified

In-amp specifications

Gain set with 1 external resistor (gain range: 1 to 1000)

Input voltage noise: 8 nV/√Hz maximum at 1 kHz

CMRR (G = 1): 90 dB minimum

Input bias current: 0.8 nA maximum

?3 dB bandwidth (G = 1): 1.2 MHz

Slew rate: 2 V/μs

Wide power supply range: ±2.3 V to ±18 V

1 ppm/°C, 0.03 resistor matching

APPLICATIONS

Industrial process controls

Wheatstone bridges

Precision data acquisition systems

Medical instrumentation

Strain gages

Transducer interfaces

Differential output