AD7008/PCB中文資料亞德諾數(shù)據(jù)手冊PDF規(guī)格書

PRODUCT DESCRIPTION

The AD7008 direct digital synthesis chip is a numerically controlled oscillator employing a 32-bit phase accumulator, sine and cosine look-up tables and a 10-bit D/A converter integrated on a single CMOS chip. Modulation capabilities are provided for phase modulation, frequency modulation, and both in-phase and quadrature amplitude modulation suitable for QAM and SSB generation.

Clock rates up to 20 MHz and 50 MHz are supported. Frequency accuracy can be controlled to one part in 4 billion. Modulation may be effected by loading registers either through the parallel microprocessor interface or the serial interface. A frequency-select pin permits selection between two frequencies on a per cycle basis.

The serial and parallel interfaces may be operated independently and asynchronously from the DDS clock; the transfer control signals are internally synchronized to prevent metastability problems. The synchronizer can be bypassed to reduce the transferlatency in the event that the microprocessor clock is synchronous with the DDS clock.

A power-down pin allows external control of a power-down mode (also accessible through the microprocessor interface) The AD7008 is available in 44-pin PLCC.

FEATURES

Single +5 V Supply

32-Bit Phase Accumulator

On-Chip COSINE and SINE Look-Up Tables

On-Chip 10-Bit DAC

Frequency, Phase and Amplitude Modulation

Parallel and Serial Loading

Software and Hardware Power Down Options

20 MHz and 50 MHz Speed Grades

44-Pin PLCC

APPLICATIONS

Frequency Synthesizers

Frequency, Phase or Amplitude Modulators

DDS Tuning

Digital Modulation