AD585中文資料亞德諾數(shù)據(jù)手冊(cè)PDF規(guī)格書

PRODUCT DESCRIPTION

The AD585 is a complete monolithic sample-and-hold circuit consisting of a high performance operational amplifier in series with an ultralow leakage analog switch and a FET input inte grating amplifier. An internal holding capacitor and matched applications resistors have been provided for high precision and applications flexibility.

The performance of the AD585 makes it ideal for high speed 10- and 12-bit data acquisition systems, where fast acquisition time, low sample-to-hold offset, and low droop are critical. The AD585 can acquire a signal to ±0.01 in 3 μs maximum, and then hold that signal with a maximum sample-to-hold offset of 3 mV and less than 1 mV/ms droop, using the on-chip hold capacitor. If lower droop is required, it is possible to add a larger external hold capacitor.

FEATURES

3.0 ms Acquisition Time to 60.01 max

Low Droop Rate: 1.0 mV/ms max

Sample/Hold Offset Step: 3 mV max

Aperture Jitter: 0.5 ns

Extended Temperature Range: –558C to +1258C

Internal Hold Capacitor

Internal Application Resistors

612 V or 615 V Operation

Available in Surface Mount

APPLICATIONS

Data Acquisition Systems

Data Distribution Systems

Analog Delay & Storage

Peak Amplitude Measurements

MIL-STD-883 Compliant Versions Available