GENERAL DESCRIPTION

The AD4697/AD4698 are compact, high accuracy, low power,

8-channel, 16-bit, 500 kSPS/1 MSPS, multiplexed input precision,

successive approximation register (SAR) analog-to-digital converters

(ADCs) with Easy Drive features and extensive digital functionality.

The AD4697/AD4698 are optimal for use in space constrained,

multichannel, precision data acquisition systems and monitoring

circuits. The AD4697/AD4698 feature a true 16-bit SAR ADC core

with no missing codes, an 8-channel, low crosstalk multiplexer, a

flexible channel sequencer, overvoltage protection clamp circuits on

each analog input, on-chip oversampling and decimation, threshold

detection and alert indicators, and an autonomous conversion (autocycle)

mode.

The AD4697/AD4698 Easy Drive features relax the drive requirements

of the analog front end (AFE) and reference circuitry. Analog

input high-Z mode and reference input high?Z mode simplify system

designs, reduce component count, and increase channel density

by removing the need for dedicated high speed ADC drivers and

reference buffers. The WLCSP option of the AD4698 includes an

internal reference buffer, which provides a true, buffered reference

input.

Input overvoltage protection clamps on each analog input protect

the AD4697/AD4698 from overvoltage events and prevent overvoltage

events on one channel from degrading performance on other

channels (see Figure 27).

Advanced digital functionality makes the AD4697/AD4698 compatible

with a variety of low power digital hosts. The low serial peripheral

interface (SPI) clock rate requirements, on-chip customizable

channel sequencers, and oversampling and decimation reduce the

burden on the digital host system. Autocycle mode and threshold

detection features enable low power, interrupt driven firmware design

by performing conversions autonomously and generating alerts

based on channel specific threshold limits.

The AD4697/AD4698 are available in a 4.00 mm × 4.00 mm,

24-lead lead frame chip scale package (LFCSP) and the AD4698 is

available in a 2.960 mm × 2.960 mm, 36-lead wafer level chip scale

package (WLCSP). All packages are specified with operation from

?40°C to +125°C.

FEATURES

? Easy Drive

? Reduced analog input and reference drive requirements

? On-chip reference buffer (WLCSP only)

? Overvoltage protection up to 5 mA on each analog input

? Long acquisition phase, ≥71.5 (715 ns/1000 ns) of cycle time at 1 MSPS

? High performance

? Sample rate: 500 kSPS (AD4697) or 1 MSPS (AD4698)

? INL: ±1 LSB maximum

? Guaranteed 16-bit, no missing codes

? SINAD: 93 dB typical, fIN = 1 kHz

? Oversampled dynamic range: 111.2 dB, OSR = 64

? Small footprint, high channel density

? 24-lead, 4.00 mm × 4.00 mm LFCSP

? 36-lead, 2.960 mm × 2.960 mm WLCSP

? Easy Drive features support system level designs with fewer components

? Enhanced digital functionality

? First conversion accurate, no latency or pipeline delay

? Fast conversion time and dual-/quad-SDO modes allow low SPI clock rates

? Customizable channel sequencer

? On-chip oversampling and decimation

? Threshold detection alerts

? Offset and gain correction

? Autonomous conversion (autocycle) mode

? 1.14 V to 1.98 V logic SPI

? Low power

? 8 mW at fS = 1 MSPS and 4 mW at fS = 500 kSPS

? 4 μW standby power dissipation with the internal LDO disabled

? Internal LDO enables 3.15 V to 5.5 V, single analog supply operation

? Wide operating temperature range: ?40°C to +125°C

APPLICATIONS

? Photodiode monitoring

? Medical instrumentation

? Vital signs monitoring

? Electronic test and measurement

? Automated test equipment

? Instrumentation and process control

? Battery-powered equipment

AD4698BCBZ-RL7屬于集成電路（IC） > 模數轉換器（ADC）。亞德諾半導體技術有限公司制造生產的AD4698BCBZ-RL7模數轉換器（ADC）模數轉換器（ADC、A/D 或 A 轉 D）對模擬信號進行采樣，例如由麥克風采集的聲音或傳感器的輸出，然后將其轉換為數字信號。一般來說，數字輸出是二進制補碼二進制數，與輸入成比例。輸入類型可能是差分、偽差分或單端輸入。模數轉換器可按照位數、采樣率、輸入數、接口、轉換器數和架構（例如自適應增量、雙斜率、折疊、流水線、SAR、三角積分、兩步式）進行選擇。