Radiation Hardened 10-to-4 Line Priority Encoder

These nine-input priority encoders accept data from nine active LOW inputs and provide a binary representation on the four active LOW outputs. A priority is assigned to each input so that when two or more inputs are simultaneously active, the input with the highest priority is represented on the output. Input line I9 has the highest priority.

Features

? QML Qualified Per MIL-PRF-38535 Requirements

? 1.25 Micron Radiation Hardened SOS CMOS

? Radiation Environment

- Latch-Up Free Under Any Conditions

- Total Dose (Max.) . . . . . . . . . . . . . . . . . 3 x 105 RAD(Si)

- SEU Immunity . . . . . . . . . . . . . -10 Errors/Bit/Day

- SEU LET Threshold . . . . . . . . . . . . >100MeV/(mg/cm2)

? Input Logic Levels. . . . VIL= (0.3)(VCC), VIH= (0.7)(VCC)

? Output Current. . . . . . . . . . . . . . . . . . . . . . . . . . ±12mA (Min)

? Quiescent Supply Current . . . . . . . . . . . . . . . 20μA (Max)

? Propagation Delay . . . . . . . . . . . . . . . . . . . . . .17ns (Max)

Applications

? High Speed Control Circuits

? Sensor Monitoring

? Low Power Designs