9774055151R中文資料伍爾特?cái)?shù)據(jù)手冊(cè)PDF規(guī)格書(shū)

General Information:

Operating Temperature -55 up to +150 °C

Storage Conditions (in original

packaging) < 40 °C ; < 75 RH

Moisture Sensitivity Level (MSL) 1

In Tape & Reel packaging a Polyimide Tape is fixed on the top of the spacer for automatic assembly.

During the programming of the Pick and Place machine and the AOI, please consider the flap of the

Polyimide Tape.

During the design of the PCB layout, please consider the flap of the Polyimide Tape. If more SMT

Spacers are placed close to each other, the flap may disturb the Pick and Place process.

General:

? This mechanical component was designed and manufactured for use in general electronic equipment.

? Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any

equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control,

ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are

especially required and/or if there is the possibility of direct damage or human injury.

? Mechanical components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer.

? The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions

specified in the datasheet are not met, the component surface may be damaged or dissolved.

? Do not drop or impact the components, the component may be damaged.

? Würth Elektronik products are qualified according to international standards. Würth Elektronik does not warrant any customer qualified

product characteristics beyond Würth Elektronik’s specifications, for its validity and sustainability over time.

? The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the

authority of the customer. All technical specifications for standard products do also apply to customer specific products.