74LVCH16244ADGG-Q100中文資料安世數(shù)據(jù)手冊(cè)PDF規(guī)格書

General description

The 74LVC16244A-Q100; 74LVCH16244A-Q100 are 16-bit non-inverting buffer/line drivers with 3-state bus compatible outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. It features four output enable inputs, (1OE to 4OE) each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state.

Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. These features allow the use of these devices in mixed 3.3 V and 5 V applications.

The 74LVCH16244A-Q100 bus hold on data inputs eliminates the need for external pull-up resistors to hold unused inputs.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features and benefits

? Automotive product qualification in accordance with AEC-Q100 (Grade 1)

? Specified from -40 °C to +85 °C and from -40 °C to +125 °C

? 5 V tolerant inputs/outputs for interfacing with 5 V logic

? Wide supply voltage range from 1.2 V to 3.6 V

? CMOS low power consumption

? Multibyte flow-through standard pin-out architecture

? Low inductance multiple power and ground pins for minimum noise and ground bounce

? Direct interface with TTL levels

? High-impedance when VCC = 0 V

? All data inputs have bus hold. (74LVCH16244A-Q100 only)

? Complies with JEDEC standard:

? JESD8-7A (1.65 V to 1.95 V)

? JESD8-5A (2.3 V to 2.7 V)

? JESD8-C/JESD36 (2.7 V to 3.6 V)

? ESD protection:

? MIL-STD-883, method 3015 exceeds 2000 V

? HBM JESD22-A114F exceeds 2000 V

? MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)

? CDM ANSI/ESDA/Jedec JS-002 exceeds 1000 V