6611834中文資料圖爾克數(shù)據(jù)手冊PDF規(guī)格書

The junction box is designed for fieldbus

systems acc. to IEC 61158-2, i.e. it is suited for both FOUNDATION? fieldbus and

PROFIBUS-PA. When connected to a suitable

power supply unit, it can also be used in Ex

applications.

The junction box features a short-circuit limiter at each drop line/spur (e 51mA). No more

than one field device should be connected to

each drop line/spur.

The housing is made of anodized extruded

aluminum in IP20.

Note: It must be ensured that there is sufficient equipotential bonding in the system. The

device is connected to the equipotential bonding via the housing's M5 x 1 grounding bold.

The shielding is established via the 3-pin

screw terminals and is internally connected

with the M5 threaded bolt for equipotential

bonding. A second M5 threaded bolt is available for capacitive shielding. Both bolts are

not connected to the housing.

Accessories: For a higher protection rating,

we offer different aluminium and stainless

housings in IP6x with various cable glands.

■ Junction box for DIN rail mounting

■ Short-circuit protection per drop line/spur

■ Pre-assembled terminating resistor:

JRBS-40TR (sold separately)

■ Cable shielding: Capacitive or direct connection established via two M5 threaded

bolts

■ Aluminium housing

■ Entity and FISCO compliant according to

IEC 60079-11