Axioline F XC, Bus coupler, PROFIBUS DP, D-SUB-9 female connector, Extreme conditions version, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connector

Product Description

The bus coupler is intended for use within a PROFIBUS network and represents the link to the Axioline F I/O system.

Up to 63 Axioline F devices can be connected to the bus coupler.

A corresponding GSD file is available for integrating the Axioline F station into the programming system.

It can be downloaded at: phoenixcontact.net/product/2702463

Your advantages

PROFIBUS connection via 9-pos. D-SUB socket

Electrical isolation between PROFIBUS interface and logic

Rotary coding switches for setting the PROFIBUS address

DP/V1 for class 1 and class 2 masters

PROFIBUS data transmission speed of 9.6 kbps to 12 Mbps

Dynamic configuration is supported

I&M functions

Firmware can be updated

Typical cycle time of the Axioline F local bus is around 10 μs

Supports the operation of Axioline Smart Elements

Supports the AXL SE SC slot cover (firmware version 2.20 or later)

Can be used under extreme ambient conditions

Extended temperature range of -40 °C ... +70 °C (see “Tested successfully: use under extreme ambient conditions” in the data sheet)

Partially coated PCBs